Floating water pump sucks the water from lake, river and pond. It is ideal for transformation of water points in fire fighting operations.
Federation Council faced a challenge when they needed to replace their Victoria St raw water pump station. Traditional pump stations were not suitable for the site due to low water levels and a shared recreational area.
Floating Pumps
Floating water pumps are used to transport large amounts of water from one location to another. They are particularly useful in areas that are prone to flooding, and they can help reduce the risk of water damage. They are also used in a variety of industrial settings, including mining and power generation.
Floating pump intake filters rest several inches deep inside of your water tank, helping to pull in the cleanest water available. The filter is made of stainless steel, and the float is filled with foam to ensure that it stays in the middle of the water. This helps to keep your pump working efficiently, even if the float switch malfunctions. When a malfunction occurs, your pump will no longer activate, leading to flooding and property damage. Using a floating pump station will eliminate this problem by ensuring that your water is always pumped consistently. Moreover, it is easy to move the station from one location to another.
Floating Pump Accessories
A floating pump is an excellent choice for fire service for draining flooded ditches and yard sites as well as removing flood water from buildings and basements. They can also be used for water aeration and irrigation.
These pumps come with a float inlet that draws the cleanest water possible from just below the surface of the water; light material like leaves and pollen will float on the surface while heavier solids much and mud will fall to the bottom. This means that the Floating Pump only pulls in the cleanest water available – even as the water level rises and falls throughout the year.
Floating Pumps can be equipped with an optional Electronic Pump Controller. This device will control the pump based on the water level you set. It works just like a manual float switch but it does not require mechanical parts and is easy to set. It also allows for multiple float switches to be connected in series and can be controlled from a remote location.
Floating Pump Parts
Floating pumps can be transported easily to the place of operation. Their low weight and small dimensions enable them to be used in majority of rescue and fire fighting vehicles. They are also a reliable solution for flooded cellars and houses, thanks to the unsinkable floater made of high-density polyethylen.
The quality of electrical motor bearings and lubrication affect how long a pump will last. Water sediment, algae, sand and other debris can also shorten the life of a pump by increasing the amount of friction in the pump’s motor, causing overheating.
A float switch can help to prolong the life of a floating pump by turning it off when water levels are down, so the pump doesn’t run continuously. A bilge strainer helps to protect the pump by filtering out solid particles. It’s important to keep the hose length as short as possible to reduce resistance, as longer hoses generate more turbulence and restrict flow.
Floating Pump Motor
Floating pump motors are used in a wide variety of applications. These portable gas powered or hydraulic pumps are used to drain water from lakes, ponds, and rivers; pump water for irrigation in farms; supply water for fire fighting; and more. These water pumps are easy to transport and operate, making them ideal for use in a variety of emergency situations.
These pumps are also useful for dredging projects to assist in human identification and forensic initiatives. Due to their small dimension, these floating pumps are easily transported by most passenger cars and are ideal for use in remote areas where access to electric power is limited.
The self priming, gasoline-powered, 5.5 HP heavy duty motor provides excellent performance. The float is designed with an integrated handle, allowing for ease of portability and use. A nozzle is included for the discharge of the water and a 400′ hose is supplied for operation. This is an all-inclusive package that requires no setup or plumbing.